Lectrosonics Portable Digital Audio recorder.
The PDR (Portable Digital Recorder) is designed for HD quality professional use. For situations in which the distance is extreme or where using a wireless microphone is not practical, the PDR recorder can travel with your subject and capture professional quality audio, synchronized with timecode. The tiny size and rounded shape make the PDR unobtrusive and easy to place in garments and costumes, and easy to conceal when used as a “plant” microphone to capture environmental or location sound.
• Professional quality digital audio recordings in Broadcast Wave Format
• Ultra compact size for easy concealment
• Records to micro SD cards (HC) type
• Wide range input gain adjustment for mic to line level signals
• Time code sync from external source
• Standard Lectrosonics TA5M input jack
• Lectrosonics “servo bias” input preamp
• Solid machined aluminum construction
• Over six hours of operation on a single AAA lithium battery
The tiny size of the PDR makes it easy to conceal in costuming or be conveniently placed when used as a “plant” microphone to record environmental or location sound.
The audio is recorded on a micro SD card (HC type ).
With a time code sync at the start of the production, the audio track is easily placed accurately in the timeline of a ideo clip. The industry standard .wav (BWF) file format is compatible with essentially any audio or video editing software.
The recorder can also be tethered to a camera to capture a higher quality or backup audio recording. The headphone output doubles as a line output to feed the AV input on a camera. The input connector is the industry standard TA5M jack that accepts any mic or line level signal, and provides bias voltage to power a wide variety of electret lavaliere microphones. The input connection and wiring is compatible with microphones pre-wired for use with Lectrosonics professional wireless microphone transmitters. Setup and adjustment is made through an intuitive interface provided by the keypad and LCD. In keeping with typical Lectrosonics mechanical designs, the housing is machined from a solid aluminum billet for the ruggedness needed in field production.